Functions
EBW-E100
82
12.6.4
Reset
You can reset the EBW-E100 via the web interface or by pressing the reset key on
the front of the device. A software reset can be initiated by briefly pressing the
reset key once. Pressing the reset key for at least three seconds initiates a
hardware reset. A restart will be made in both cases. Pressing the reset key briefly
three times within two seconds loads the factory defaults (see Section Display and
Control Elements – Function of the Control Elements).
Configuration via web interface (menu "System", page "Reset")
In order to restart, select the radio button "Reset". Click on "OK" to
execute the reset.
In order to restart and load the default settings, select the radio button
"Load default configuration and reset". Then, click on "OK" to execute
the restart and reset the device to default settings.
In order to configure a daily restart at a defined time, check the checkbox
"Daily restart at" and enter the time for the daily restart into the entry
field.
Save your settings by clicking "OK".