Functions
EBW-E100
68
12.4
Messages
12.4.1
Configuring the Message Dispatch
The EBW-E100 can send an e-mail to any recipient on different events or trigger an
SNMP trap. A series of pre-define events are available for this, like set-up of
connections or VPN tunnels for example.
Configuration via web interface (menu "Messages", page "Configuration")
In order to enable to send an e-mail, you must enter the necessary data
for the e-mail account in the section "E-mail". Enter the e-mail address
into the field "E-mail address" for this. Enter the first and last name of the
person holding the e-mail account (or any text) into the field "Real
name". Enter the domain name or the IP address of the SMTP server into
the field "SMTP server" as well as the port, at which the SMTP server
receives e-mails, into the field "SMTP port" (usually port 25). Enter the
user name for the e-mail account into the field "User name" as well as
the associated password into the field "Password". Check the checkbox
"Use SSL/TLS" to send the e-mails encrypted.
In order to enable to trigger an SNMP trap, you must specify the SNMP
version in the section "SNMP traps". In order to use SNMP v2c, select
the radio button "SNMP v2c". Moreover, the community string must be
entered into the field "Community". In order to use SNMP v3, select the
radio button "SNMP v3". Moreover, the community string must be
entered into the field "Community". In order to use an optional SNMP v3
authentication, select the authentication method in the drop-down list
field "Authentication" and enter the password for the authentication (at
least 8 characters) into the respective field. In order to use an optional
SNMP v3 encryption, select the encryption method in the drop-down list
field "Encryption" and enter the password for the encryption (at least
8 characters) into the respective field. An authentication is pre-condition
for an encryption.
Save your settings by clicking "OK".
