Instrumentation Systems & Services MicroSpeed 196, Руководство пользователя

Страница: 18 / 19

n
APPENDIX A
SPECIFICATIONS
Voltage
Fuse
115 Vac, or 230 Vac, 50/60 Hz, 10
1/4 Amp. Fast Blow, 115 Vac./
1/8 Amp. Fast Blow, 23OVac.
Transducer Supply
12 Vdc, (unregulated) 250 mA Max.
Transducer Input:
Wave Shape
Types
Square, Sine
Maximum Input Frequency
Internal Pull-Up
Trigger Levels
Analog Output:
NPN Open Collector - PNP Open Collector -
Magnetic Pickup (Zero Crossing) - Logic Level
40 Khz - Master, 32 Khz - Follower
2.2
Pull-up to 12 V
2.5 Vdc NPN, PNP, and Logic Level
50 mV - Zero Crossing (100 mv Peak Minimum Signal)
Type
Maximum Output
Current
Resolution
Optically Isolated 0 to ±15 Vdc
Adjustable from ±3 Vdc to ±15 Vdc
10 mA Maximum
12-bit D/A Converter
Input Power:
External Control Inputs (Back Panel):
Sustained Contact Closures
Momentary Contact Closures.
Forward/Reverse
Closed Loop/Open Loop
Master/Follower
Keypad Unlocked/Keypad Locked
Set Points 1 & 3 / Set Points 2 & 4
Set Points 3 & 4 Enable
Local Command/Remote Command
Scroll Up/12 Scroll Down
External Start/Stop Switches (Back Panel):
Momentary, N.O. Run
Momentary, N.C. Stop
Momentary, N.O. Jog
Momentary, N.C. Emergency Stop
Back Panel Transistor Outputs:
NPN, open Collector Drivers
(50 Vdc Max, 250 mA
.3 Watts Max.) High Alarm
Low Alarm
Ramp Compete
Zero Speed
Deviation
Drive Enable
Operational Specifications:
Accuracy
Respons
Modes of Operation
Preset Speeds
Accel/Decel Times
Processor
Speed Display
Alphanumeric Display
Function LEDs
Diagnostics/2nd Function
Computer Interface
.01% of Speed Set Point (Master)
Zero Cumulative Error (Follower1
10-Millisecond Control Loop, Indivdually Adjustable
PID Gains
Master/Follower/Auxiliary Trim
4 Master, 4 Follower, 1 Jog
User Programmable from 0.1 to 600 Seconds
Intel 80C196TB 16-Bit Micro Controller
4-Digit, 7-Segment LED, .43-Inch height
8-Character, 5 x 7 Dot Matrix, .20-Inch height
1 Run (Green)
1 Stop (Red)
1 Local (Amber)
1 Remote (Amber)
1 Set Point 1 (Amber)
1 Set Point 2 (Amber)
Diag. 0 Custom User Unit Display
Diag. 1 Keypad Test
Diag. 2 Display Test
Diag. 3 Input Test
Diag. 4 Memory Test
Diag. 5 Output Test
Diag. 6 Serial Interface Test
Diag. 7 Return to Factory (Programming Defaults)
Diag. 8 Not Used
Diag. 9 Digital Speed Potentiometer
RS422 Interface Standard, 300 to 19200 Baud,
13 Character String, 1 Start, 8 Data, No Parity, 1 Stop
Mechanical/Environmental Specifications:
Enclosure Material
KeyPad
Cold Rolled Steel
Tactile Feedback Membrane, Chemical Resistant,
Operating Temperature
Splashproof
0°C to +50°C
Humidity
Panel Cutout 0 to 90%,Non-Condensing
Weight
5.4-inch Width x 2.7-inch Height x 7.20-inch Depth
6 lbs.
Specifications Subject to Change Without Notice
35
36