7
STEP 11
Prepare front wheel assembly for attachment
11A
11B
11C
11A.
Carefully set the trailer back down with the towbar extended in front and the wheels mounted in place.
11B.
Locate the front wheel assembly: wheel, fork, bracket, lock knob, washers, and carriage bolt.
11C. Unscrew the lock knob and remove it completely from the carriage bolt. Then, remove the washers from
the carriage bolt. Leave the carriage bolt within the bracket.
STEP 12
Position front wheel assembly to tow bar
12A
12B
12C
12A.
Hold the end of the tow bar with your left hand and the front wheel bracket in your right hand.
12B. Hold your thumb over the head of the carriage bolt and slide the end of the carriage bolt completely
through the hole in the tow bar so that that the bracket rests snugly against the tow bar.
12C. Place the washers over the end of the carriage bolt and tighten the lock knob completely.
STEP 13
13A
13B
13C
13D
13A. Loosen the lock knobs on the handlebar clamps but do not remove the lock knobs. Hold the handlebar
so that the clamps are positioned at the rear of the cabin frame.
13B.
Pinch the clamp to open it and slide the clamp over the canopy and cabin frame tubing.
13C. Tighten the lock knob and repeat for the other side.
13D. The product is now ready for use in stroller mode.
WARNING
Always use the safety wrist strap when pushing this product in stroller mode!
Bracket
Fork
Carriage bolt
Lock knob
Hole in
towbar
Handlebar
clamp
