6
STEP 8
Prepare wheels for attachment
8A
8B
8C
8A.
Lift the front end of the trailer up and rest the trailer on its back. The wheel bracket slots open upward.
8B.
The wheel axles may come with black protective caps. These are for shipping and should be discarded.
8C.
Open the quick-release lever and loosen the nut a few turns so the axle is visible and there is a space
between the quick-release axle nut and the black spacer nuts. Do not remove the quick-release nut.
STEP9
Insert wheels into wheel brackets
9A
9B
9C
9A.
Slide the wheel all the way down into the wheel bracket slots with the quick-release lever to the outside.
The axle should rest at the bottom of the bracket slots to ensure that the wheel is properly aligned.
9B.
Tighten the nut by hand and then clamp the lever down so that the wheel is secured.
9C.
Repeat for the other wheel. Check to make sure that both wheels are secure and aligned.
STEP 10
Release tow bar and rotate into it position for use in trailer and stroller modes
10A
10B
10C
10D
10A.
The tow bar rests within a slotted bracket and is held in place by a spring-loaded latch.
10B. Grip the tow bar with your left hand and push both sides of the latch downward with your right hand.
Once the latch clears the slot, remove your right hand
WARNING
To prevent injury, please use extreme care when folding and unfolding this product!
10C. Rotate the tow bar upward. Be mindful of the coupler at the end of the tow bar.
10D. Rotate the tow bar all the way up and press it into the bracket. The latch will engage automatically.
Wheel
brackets
Quick-release
axle nut
Quick-release
lever
Tow bar
Axle
Coupler
Black spacer
nuts
