8
STEP 14
Rotate front wheel assembly up for use in trailer mode
14A
14B
14C
14A.
Loosen the front wheel lock knob enough to allow the bracket to separate from the tow bar.
14B.
Rotate the wheel assembly up so that the bracket wings rest on top of the tow bar.
14C. Press the bracket firmly against the tow bar and tighten the lock knob to secure the wheel.
STEP 15
Coupler attachment for bikes with rear hub nuts.
(Note: If your rear bike tire has a quick-release rear axle please proceed to Steps 17 & 18)
15A
15B
15C
15D
15A.
Loosen the rear bike hub nut with a wrench.
15B.
Remove the hub nut and washer from the bike.
15C. Slide the tab washer over the axle so the tab fits into the slot in the bike frame dropout.
15D. Position the coupler plate over the axle so that the pegs on the back of the plate fit into the holes in the
tab washer, and the coupler plate is vertical with the large hole below the axle.
STEP 16
Attach trailer tow bar to bike
16A
16B
16C
16D
16A.
Replace bike hub nut and washer and tighten by hand.
16B.
Tighten the bike hub nut securely with a wrench.
16C. Insert the end of the trailer tow bar into the large hole and fasten the Q/R pin.
16D. Loop safety strap around bike frame and clip the end into the “D” ring at the end of the tow bar.
WARNING
Safety strap must attach to the bike frame when using this product in trailer mode.
Bracket
wing
Bracket
wings
