TimerLinc Owner’s Manual
SETTING UP TIMERS
Adding a Timer to TimerLinc
TimerLinc will automatically turn on or off its load and any Responders via its programmed timers.
TimerLinc contains 28 timers: 14 “Active” or On and 14 Off. Odd-numbered timers are designated as On
timers and even-numbered timers are Off timers.
NOTE: After manually controlling TimerLinc (with its On/Off button), the next timer will not activate if the
load is already in that state. For example, if you’ve manually turned on TimerLinc’s load, the next timer
will not activate if it is an On timer. The same holds true you have turned off the load and the next timer is
an Off timer. After that, timers will activate as scheduled.
1) Tap the Mode + button until TimerLinc reads “1 ACTIVE TIME SET”
2) Tap the Day button to cycle through the day of the week options
until you reach the day you wish the On timer to activate on. For
example, the timer displayed to the right will activate everyday.
3) Press & hold the Set - or Set + button. Release when you are close
to the desired time.
For the first several seconds, the minutes will increase by
increments of one. Then, minutes will increase by 10 and then
hours will increase by one.
4) Tap the Set - or Set + buttons until you achieve the desired time
5) Tap the OK button to proceed to the next timer event
TimerLinc will display “2 OFF TIME SET”, indicating it is ready
to set the Off timer
Page 9 of 18