TimerLinc Owner’s Manual
Installing TimerLinc
HINT: You can program the clock or date and set timers before installing TimerLinc. Just keep in mind
that TimerLinc will not be able to power its connected device (also called the load) or communicate with
INSTEON devices when not plugged into your home’s AC power.
1) If you are using TimerLinc as a remote timer only, skip
to step 2.
Plug the load into the outlet on the bottom of TimerLinc
(if the load has a built-in switch, make sure it is in the on
position)
2) Plug TimerLinc into an unswitched wall outlet
3) If the load does not turn on, tap the On/Off button on
TimerLinc
The load will turn on
The TimerLinc LCD will read “Active”
SETTING UP TIMERLINC
For convenience, the TimerLinc clock and date can be set with TimerLinc unplugged from your home’s
AC power. However, make sure the battery isolation tab is removed to engage the battery. While
TimerLinc is unplugged it will not be able to power its load or communicate with other INSTEON devices.
Setting the Clock
1) Tap the Mode + button until TimerLinc reads “SET
CLOCK”
2) Press & hold the Set - or Set + button. Release when
you are close to the accurate time.
For the first several seconds, the minutes will
increase by increments of one. Then, minutes will
increase by 10 and then hours will increase by one.
3) Tap the Set - and + buttons until you achieve the
accurate time
4) Tap the Mode - or + to return to Ready Mode
Page 5 of 18