Page 2 of 2
Rev. 01-15-2010
Quick-Start Guide INSTEON Thermostat Adapter
Controlling Thermostat Adapter
•
Tap an On or Scene button on a Linked Controller to recall the thermostat mode and set points established during Linking
•
Tap on Off button on a Linked Controller to turn off the thermostat mode and set points established during Linking
•
Tap the Bright
**
button on a Linked Controller to raise the set point(s) by a single degree
•
Tap the Dim
**
button on a Linked Controller to lower the set point(s) by a single degree
** To prevent “runaway” temperature set points, these operations only apply to Controllers with Bright/Dim buttons (e.g.,
RemoteLinc
™
). For example, pressing & holding the On/Off buttons from a SwitchLinc
™
or KeypadLinc
™
will not change the
temperature set points.
Linking Thermostat Adapter to Control Other INSTEON Devices
Thermostat Adapter can be used to control remote INSTEON devices when the thermostat switches the A/C, heat or fan on and off.
See your INSTEON device’s Owner’s Manual for more detailed instructions.
The following will work for the most common INSTEON devices.
1) Set your remote INSTEON device to the state you wish to activate from Thermostat Adapter
2) Set your thermostat to the state you wish to use to trigger your remote INSTEON device (Cool, Heat, Fan On mode).
NOTE: Thermostat must be in Off mode to Link to Fan On mode
3) Set Thermostat Adapter to Linking Mode by pressing & holding the Thermostat Adapter Set button for about 5 seconds
The Thermostat Adapter LED will begin blinking
The thermostat display will flash all the LCD characters
You will have 4 minutes to complete the next step before Linking Mode automatically times out.
4) Press & hold the Set button on your remote INSTEON device
The Thermostat Adapter LED will stop blinking
The thermostat display will flash all the LCD characters
5) Test that Linking was successful by changing the mode on your thermostat to confirm that the remote INSTEON device is working
as expected
SmartLabs Limited Warranty – SmartLabs warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be
free from defects in material & workmanship & will perform in substantial conformity with its Owner's Manual. Warranty shall not apply to defects caused by
misuse or neglect.
U.S. Patent No. 7,345,998, International patents pending © Copyright 2010
SmartLabs, 16542 Millikan Ave., Irvine, CA 92606, 1-800-SMARTHOME (800-762-7846)
Complete Instructions, Troubleshooting, and Tech Support
Owner’s Manual:
http://wiki.smarthome.com/index.php?title=2441V_(Rev_2.0%2B)_Manual
Call: Tech. Support @ 1-800-SMARTHOME (800-762-7846)
Contact Us Online:
http://www.smarthome.com/contactus.html
