Instar IN-2904, Руководство пользователя

Страница: 9 / 36

7
Troubleshooting
The green LED isn’t on
Your camera doesn’t have a connection to your router, because the LAN cable is dam-
aged, the connector is loose or your camera is connected to a wrong port on your router
or switch.
The green LED goes on and off every x seconds
Your camera is continously restarting - probably because of a loose contact. Please check
the power connector on the camera side. Turn the plug by 180 degrees in both direction
and check if the problem persists. Make sure the green status LED on the power supply
is on continuously.
Connect the camera using an IN-LAN® Adapter (optional)
Simply plug one IN-LAN adapter into a power socket next to your broadband router
and connect the adapter to your router via an Ethernet cable. Plug the second IN-LAN
unit into an outlet close to your INSTAR camera and connect the camera to the IN-LAN
adapter using the camera’s Ethernet cable.
IN-LAN 500/p
Powerline Adapter
IN-LAN uses the household pow-
er grid to transfer data between
computers equipped with suitable
Additional accessories, like the IN-LAN Adapter, can be found in the accessories of your camera model on www.instar.de and are sold separately.
adapters and other network components. As a result, any power outlet can be used as a
network access point. IN-LAN is an intelligent and secure technology that lets you set
up a home network easily via your household power grid - without the need of complex
and expensive dedicated cabling.
For a direct cable connection between camera and computer, please note:
The network cable provided with the camera is not a crossover cable. It is just a nor-
mal patch cable. Most modern computers network interfaces support the automatic
switching between crossover and normal patch cable - you can use the cable that came
with the camera to connect it directly. If you are using an older system to connect your
camera directly you might need a crossover network cable.
To set up the camera for the first installation we recommend to connect the camera
directly to your router. This router on the other side has to be connected with your com-
puter. Other ways of connections are only recommended to experienced users. Please
refer to our online documentation on www.faq.instar.de .