Instar IN-2904, Руководство пользователя

Страница: 6 / 36

4
2 PRODUCT FEATURES
l
Power over Ethernet
or
PoE
technology describes a system to pass electrical power
safely through the unused lines 4,5,7,8 on the Ethernet cable. The IEEE standard for
PoE requires category 5 cable or higher for high power levels. The power comes from
a power supply within a PoE-enabled networking device such as an Ethernet switch or
power injectors that stand between a regular Ethernet switch and the powered device
(
not included
).
Due to the mandatory Ethernet cable connection all PoE cameras will be
without
wire-
less LAN (WiFi) support. All sections regarding wireless LAN are only effective for the
camera model IN-3010 / IN-3011 (and
not
for the model IN-3010 PoE).
»
High Quality Polycarbonate Camera Housing
»
Integrated Alarm I/O Relay for
External Sensors
or Signalling Devices
» Resolution: 640 x 480 (VGA), 320 x 240 (QVGA), 160 x 120 (QQVGA)
»
Interchangeable Lenses
with a Wide Range of Focal Lengths
»
Supported Network Protocols: TCP/IP, HTTP, ARP, RARP, TCP, ICMP, DHCP, UPnP
»
Integrated 10/100Mbit Network Interface
»
Supports W-LAN (Wi-Fi 802.11b/g) (only IN-3010 & IN-3011)
»
Integrated Webserver with Web User Interface (based on
HTML5/CSS3
and
jQuery
)
»
Free DDNS
Address for Remote Access included
»
Only the Model
IN-3010 PoE
can be used via 803.11af Power-over-Ethernet !
» MJPEG Video Compression
» Snapshot Function and Video Recording (the latter only in Internet Explorer!)
»
Adjustable Framerate (only in Internet Explorer)
»
Motion Detection Alarm Notification by Email (6 Snapshots)
»
FTP Snapshot Upload - Continuous and Alarm Triggered
Hardware
Connectivity
Software