Instar IN-2904, Руководство пользователя

Страница: 20 / 36

18
5.5 ALARM
l
5.5.1 ALARM/ALARM
Here you can adjust the camera’s behaviour
in case of a motion alert trigger event. Once
the motion detection is activated, its sensi-
tivity can be adjusted from very insensitive
(value=0) to very sensitive (value=10).
Your camera detects motion by a picture
analysis that is sensitive to every change inside the video frame instead of employing
an infrared or microwave sensor. In case the camera’s position is prone to rapid light
changes, e.g. changes in sun intensity due to cloud movements, you might be confronted
with a high number of false alarms.
Motion
300
IN-Motion 300
Plug & Play - PIR Motion Detector
IN-Motion 300 - the passive infrared detector es-
pecially designed for your INSTAR camera. The
simplest way to avoid false alerts by changes in
light conditions.
All components needed for the installation are al-
ready included in the delivery !
Additional accessories, like the IN-Motion 300, can be found in the accessories of your camera on www.instar.de and are not part of the scope of
the delievery.
You can use the
Scheduler
to automatically activate the alarm in desired time intervals.
Every blue box set inside the scheduler represents a 15 minutes time window in which
the alarm function is active.
Be aware that the internal camera time is used for the scheduler. Please make sure that
the camera’s timezone is set correctly and the daylight saving time function is activated
if indicated (s. 5.4.3 ).
To solve this problem you can attach an
external motion detector
(IN-Motion 300; s.be-
low) to the I/O relay of the camera. Please check “ Activate External Input ” to start using
the external sensor and set the trigger level according to your devices demands. Please
only activate the external input if an external sensor is connected - since you might re-
ceive false alerts otherwise.