manualshive.com logo in svg

Inspur TS860M5, Руководство пользователя

Поделиться
Скачать
Inspur TS860M5 Скачать руководство пользователя страница 67

 61

BIOS Setup

Create RAID Menu Instruction Table

Interface Parameters

Function Description

Name

Please enter a volume label name less than 16 characters without containing any 

special characters.

RAID Level

Please select RAID volume level. If no volume has been created at present, there are 

four volume levels of RAID0 (Stripe), RAID1 (Mirror), RAID10 (RAID0+1) and RAID5 

(Parity) for selection. Please select volume level according to actual requirements. 

RAID0: This RAID volume is allowed to be made on 2 or above HDDs.

RAID1: This RAID volume is allowed to be made on 2 HDDs.

RAID10: This RAID volume is allowed to be made on 4 HDDs, which is only available 

when HDD quantity is 4 or above.

RAID5 (Parity): This RAID volume is allowed to be made on 3 or above HDDs.

Select Disks

Select HDDs to make RAID volume, press Enter, select X, and then press Enter to 

return to Create RAID Volume interface.

Strip Size

Please select the strip size, only RAID0 and RAID5 volumes could enable this option.

Capacity

Set the volume capacity.

2.3

 Delete RAID Volume menu. After entering Delete RAID Volume menu, press [DEL] to 

delete the selected RAID volume, and the system will prompt “ALL DATA IN THE VOLUME 

WILL BE LOST! Are you sure you want to delete “Volume0*”? (Y/N)”. To delete this RAID 

volume, please enter “Y”, to cancel the deletion, please enter “N”.

2.4

 Reset Disks to Non-RAID menu. After entering Reset Disks to Non-RAID menu, system 

will display all HDDs in RAID volume. Please use the space key to select the HDD to reset 
according to the actual demand, and then press Enter to reset the HDD. The system will 

prompt “Are you sure you want to reset RAID data on selected disks? (Y/N)” again, enter “Y” 

or “N” according to the prompt. It is to be noted that all data on this disk will be lost after 
reset. Meanwhile, this disk will not belong to RAID volume any more.

Содержание TS860M5








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды