Inspur TS860M5, Руководство пользователя

Страница: 66 / 135

60
Key Instruction Table
Key Description
↑↓ Used to move cursor in different menus or to change values of menu options.
TAB To select the next menu option.
Enter To select a menu.
Esc To exit menu or return to previous menu from submenu.
Menu Instruction Table
Create RAID Volume To create an RAID volume.
Delete RAID Volume To delete an existed RAID volume.
Reset Disks to Non-RAID To reset HDDs in RAID volume, and to restore them to non-RAID status.
Mask Disk as Spare
To mask the HDDs as spare disks. The data will be cleared, and these HDDs can
not be selected during RAID setting. It can be restored through the Reset Disks to
Non-RAID menu.
Exit To exit SATA Host RAID configuration interface.
2.2 Create RAID Volume menu. After entering SATA RAID configuration interface, you could
use up and down arrow keys to select this menu, and then press Enter to enter the Create
RAID Volume menu, or directly input the number before the menu to enter the Create RAID
Volume menu. For other menu operations that are similar, it will not be repeated here. A
Create RAID Volume instance is shown in the following figure.
After completing the above settings, please select [Create Volume], and press Enter. The
system will prompt “WARNING: ALL DATA ON THE SELECTED DISKS WILL BE LOST. Are you sure
you want to create this volume? (Y/N)”. To create an RAID volume, please enter “Y”. A volume
will be created, and all data on the selected disks will be lost. Otherwise, please enter “N”,
to exit volume creation. Here we enter “Y” to create an RAID volume. After the creation is
completed, return to MAIN MENU interface, the created RAID volume will be displayed.