manualshive.com logo in svg

Inspur TS860M5, Руководство пользователя

Поделиться
Скачать
Inspur TS860M5 Скачать руководство пользователя страница 108

102

one.

9.13.2 WEB Update

BMC firmware update is supported via the Management Web GUI. BMC firmware update 
is configured with Watchdog. The watchdog time is 20 min. When entering the flash mode, 
the watchdog will be active, 20min timeout will reset the BMC automatically. When flashing 
the image, the watchdog will be active, 20 min timeout will reset the BMC automatically.
Dual BMC firmware image is supported.
When updating BMC firmware, user can specify which image area to update.

•

 Image-1

•

 Image-2

•

 Inactive image

•

 Both images (Default)

Note:

The firmware upgrade process is a critical operation, once you enter the update mode and 
choose to cancel the firmware update operation, the BMC must reboot, which means that 
you must close the browser and login to the BMC again before any other action can be 
performed.
It defaults to use the higher version of the two images, which you can modify through the 
interface.

Firmware update steps:

●

  Go to flash page.

●

Select image file, click Upload button to upload file, BMC will go to flash mode after 

upload file, IPMI service will stop, and then BMC will verify image. Verify:

Size should be 32M.

Verify image integrity, it will make sure this is BMC image.
If verify failed, BMC will stop flash and restart.

●

Check image version and current image version, then click Update button to flash.

9.13.3 SOCFlash Update

In Windows/Linux/Dos OS, it uses socflash tool to update the firmware. The steps are as 
follows:

Содержание TS860M5








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды