background image

Regulatory Compliance Notices

 133

energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference, in which case the user will be required to 

correct the interference at personal expense.

12.3 Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI 

connector hoods in order to maintain compliance with FCC Rules and Regulations.

12.4 European Union Regulatory Notice

Products bearing the CE marking comply with the following EU Directives: 

Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

CE compliance of this product is valid if powered with the correct CE-marked AC adapter 
provided by INSPUR.  

Compliance with these directives implies conformity to applicable harmonized European 

standards (European Norms) that are listed in the EU Declaration of Conformity issued by 
INSPUR for this product or product family and available (in English only) within the product 

documentation.

The compliance is indicated by one of the following conformity markings placed on the product:   

Please refer to the regulatory label provided on the product.

12.5 Disposal of Waste Equipment by Users in the European Union

This symbol on the product or on its packaging indicates that this product must not be 
disposed of with other household waste. Instead, it is your responsibility to dispose of your 
waste equipment by handing it over to a designated collection point for the recycling of 
waste electrical and electronic equipment. The separate collection and recycling of your 
waste equipment at the time of disposal will help to conserve natural resources and ensure 
that it is recycled in a manner that protects human health and the environment. For more 
information about where you can drop off your waste equipment for recycling, please 

Содержание NF5266M5



















































































































































Отзывы: