Inspur NF5180M6, Руководство пользователя

Страница: 37 / 103

29
To install the crossbar:
1. Align the bulges on the ends of the crossbar with the J-slots on the chassis.
2. Lower down the crossbar onto the chassis until it snaps into place.
Figure 4-6 Installing the Crossbar
4.4.4 Super-Capacitor Replacement
To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching.
To remove the super-capacitor:
1. Remove the access panel (Refer to Access Panel Replacement).
2. Remove the air duct (Refer to Air Duct Replacement).
3. Remove the crossbar (Refer to Crossbar Replacement).
4. Disconnect the cable of the super-capacitor.
5. Undo the velcro of the super-capacitor, remove it from the battery holder, and put
it into an antistatic bag.