Insportline TA-7710, Руководство пользователя

Страница: 59 / 96

59
CENTERING THE BELT: If the running belt is
off center to the RIGHT:
5. If the belt is slightly off-center, first runs the treadmill without
anyone on it at 6~8 kph (4~5 mph) for at least 5~10 minutes to
see whether the treadmill could automatically center the running
belt. If not, move to step 2. to start centering the belt.
6. Stand behind the treadmill, with the treadmill running at 6kph
(4mph) observe the running belt. If the belt tracks off center to
the right , please take a look at the following process to center
the belt.
CAUTION: Be very careful to keep your fingers and any
object clear of the belt and rollers
7. Use the Allen Wrench –
a. To turn the right rear roller adjustment bolt 1/4 turn in
clockwise direction, which moves the running belt to the
left.
b. Or turn the left rear roller adjustment bolt 1/4 turn in
counterclockwise direction, which moves the running belt
to the left.
Caution: Do not turn the adjustment bolt more than 1/4
turn at a time. Overtightening the belt can damage the
treadmill.
8. Repeat the above procedure until the walking belt is centered. It
may be necessary to test walking belt tension once you have
completed the above procedure if the belt feels like it’s slipping
while walking. Refer to below to the “ Walking Belt Slipping ”
instructions on Page 10.
WALKING BELT SLIPPING: If the running belt
slips when used.
4. First remove and unplug the power cord. Using the Allen
Wrench, turn both left and right rear roller adjustment bolt
clockwise , usually a 1/4 turn. NOTE: NEVER TURN the bolts
more then 1/4 turn at a time and always keep the running
belt centered.
5. Test the tightness of the belt. NOTE: Overtightening the belt
Adjustment Bolt Location
Adjustment Bolt Location