Insportline Erinome YKB5815, Руководство пользователя

Страница: 12 / 21

12
Remove two M5x10 Bolts (42) from the Computer (62). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided. Connect the Hand Pulse Sensor Wires (49) and Extension Sensor Wire (63) to the wires
that come from the Computer (62). Tuck wires into the Handlebar Post (7). Attach the Computer (62) onto the
top end of the Handlebar Post (7) with two M5x10 Bolts (42) that were removed. Tighten bolts with the Multi
Hex Tool with Phillips Screwdriver provided.
STEP 6: AC ADAPTER INSTALLATION
Plug one end of the AC Adapter (41) into the power jack of the Power Supply Wire (40)on the back of the Left
Shroud. Before plugging in, make sure to check carefully the specifications on the Adapter. Plug the other end of
the AC Adapter (41) into the electrical wall outlet.
INSTRUCTION MANUAL FOR TZ-6139
KEY FUNCTIONS
START/STOP:
1. Start & Pauses workouts.
2. Start body fat measurement and quit the body fat program.
3. Operates only when in stop mode. Holding key for 3 seconds will reset all function value to be zero.
DOWN: Decrease value of selected workout parameter: TIME, DISTANCE, etc. During the workout, it will
decrease the resistance load.
UP: Increases value of selected workout parameter. During the workout, it will increase the resistance load.
ENTER: To input desired value or work out mode.
TEST: Press to enter into Recovery function when computer has the heart rate value. Recovery is Fitness Level
1-6 after 1 minute. F1 is the best, and F6 is the worst.
MODE: Press to switch display form RPM to SPEED, ODO to DIST, WATT to Calories during workout.
WORKOUT SELECTION
After power-up using UP or DOWN keys to select then pressing ENTER to enter the desired mode.