27
28
FUNCTION 5 – ANTI-FREEZE SETTING
Press Function Button until F5 is selected to enter the Anti-Freeze
menu. The Anti-Freeze function is an important feature for those
climates where the pool can freeze during winter. Frozen water
expands and can cause significant damage to your equipment. The
Anti-Freeze function will monitor the outside temperature and will
turn the Pump on to a selected speed should the temperature fall
below the set point. This will maintain circulation and stop your
water from freezing.
Firstly, press up or down to select “On or Off”.
If “on” selected, temperature will then be displayed, then press
up or down to change temperature from 40 F to 48 F or 4.4 C
to 9.0 C depending on the setting choosen in Function 4. You
must also select the Speed you wish the Pump to operate by
scrolling left or right to select speed, then press up or down to
select speed your chosen speed.
When selected and the on board thermistor drops to Anti
Freeze set point, pump starts on speed selected and operates
until temperature of water increases by 2 F or 1 C.
FUNCTION 6 – POWER COST SETTING
Press Function Button until F6 is selected to enter “Power Cost”
menu.
Press up or down to change from 5 to 40 in 1 cent increments.
This value represents cents per kW hour and can be located on
your latest electricity bill to get the most accurate results.
