23
24
Setting, move around the time period by Scroll Left and Right,
then adjust with Up and Down. Continue to scroll right to select
speed of pump for that time period. Press up or down to select
speed 2, 3, or 4.
Press buttons underneath T1, T2, T3, T4 to select timer period.
Continue to repeat timer programming by selecting each period
as you desire.
Should you wish to turn off a Timer period, you can scroll to
right and select “Pump Off”. This could be a useful feature for
Summer and Winter periods where you want to operate the
pump less in Winter.
Please note: Timer periods can’t overlap. If next timer is due
to start before previous timer period finishes, then message on
screen will state that “Timers cannot overlap”.
Once your happy with your Timer settings either Press the
Function button to adjust another menu, or press the On/Off/
Auto button to save settings and operate your pump.
FUNCTION 3 – PRIME SETTING
Press Function Button until F3 is selected to move to Prime
Menu.
There are two choices using the Left or Right buttons.
Selecting Prime Time or Auto Prime. Prime Time allows you to
set the preferred starting speed for your pump and how long
you wish this to run. The Speed and Time will be dependant
on how your pool has been set-up by your pool professional.
In most instances, the priming speed will operate near high
speed for a period of 5 minutes to ensure the pump is primed
and the water is circulating after being turned off for a period
of time. However, you can also use the Prime Time to operate
Suction Cleaners, Heaters or other equipment that may require
extra flow for a designated period of time.
If you select “Prime-Time” the below screen will display and
prompt you to adjust the Period Time and RPM Speed using
the scroll left or right buttons, then up and down buttons
similar to other operations.
