www.insigniashowers.com
Last Modified: 06/05/2022
27
Accessories Installation: Water Processor
The Water Processor (magnetic scale reducer) works by reducing the random bonding of the calcium and magnesium molecules that cause limescale
buildup. Magnetic scale reducers encourage coagulation, by reducing the random bonding of the calcium and magnesium molecules that cause lime-
scale buildup. In areas where irritating hardness deposits form in shower heads or on kettle elements the magnetic scale processor works as a water
conditioner. Any scale that does form will be less tenacious and more easily removed.
Always ensure water is isolated before installation.
The installation of the processor does
not
require any electrical current.
Remove both end caps from the cartridge, being careful not to lose the rubber washer located in the water outlet cap. No washer is supplied with the
water inlet. Note the directional flow on the back of the cartridge as shown below.
Choose your location for the cartridge and attach the wall mounting clips as shown below. The cartridge can be installed horizontally or vertically, but
always follow the flow direction.
•
An accessible position should be between 1m and 3m from the appliance it is intended to protect
•
The
“
water in
”
requires a ½
”
BSP connection, either flexible hose or rigid fix.
•
The
“
water outlet
”
requires a ½
”
BSP female connection, either flexible or ridged fix.
•
Once both ends are connected, turn on the water and check for leaks. If present, isolate water and
remedy the fix accordingly.
NOTE: If installing directly on to a steam generator, the water outlet thread can be screwed directly on
to the steam generator water inlet valve.
