www.insigniashowers.com
Last Modified: 06/05/2022
23
All circuits should be installed by licensed electricians and conform to local and national codes.
Mains power supply must be cut off before installation, maintenance, and repair. Pressing the on/off button on the controller does NOT cut the power
from the supply.
Make sure that the installation complies with each country
’
s current mechanical and electrical norms.
Make sure there are no loose elements near the ventilator, as they could run the risk of being sucked up by it. If it is going to be installed in a duct, check
that it is clean of any element that could be sucked up by the ventilator.
When installing the fan, make sure that all the fittings are in place and that the structure which supports it is resistant enough to bear its weight at full
functioning power.
The unique design of the support bracket allows the central cartridge, which holds the motor and impeller to be fitted/removed without dismantling the
ductwork.
Accessories Installation: Fan
