Inova WallBed, Инструкция по сборке

Страница: 45 / 57

A.
Lay one Box Spring Panel down into the Bed
Platform so that the edge with the loop pull
is in the center of the Bed Platform and the
opposite edge is against the Headrail. Lay
down the second Box Spring Panel into the
Bed Platform so that the edge with the loop
pull is in the center of the Bed Platform and
the opposite edge is against the Footrail.
Firmly press the Box Spring Panel edges
down and visually inspect the Box Springs to
ensure all edges of the Box Spring Panels are
parallel to and supported by the Bed Platform
assembly.
B.
Locate an Angle Bracket at the middle of each
Box Spring Panel edge that abuts a Side Rail.
Once located, fasten the H-146 Angle Brackets
to the Side Rails with H-087 Screws, as shown.
STEP 24:
Install Box Springs into Bed Platform
B
Box Spring
A
Box Spring
H-146
H-087
B
Box Spring
A