Inova WallBed, Инструкция по сборке

Страница: 55 / 57

Tech support is readily available if needed
Email: support@inovabed.com
Phone:
866.528.2804
WallBed
| ASSEMBLY MANUAL
PLEASE NOTE: Your Bed may look different
than what is shown in the pictures and
videos throughout this manual
TROUBLESHOOTING
(CONT.)
them with a dry silicone-type lubricant,
available at most hardware stores. Although
this type of lubricant should not damage the
wood panels, be careful not get any on the
bed covers or mattress.
I CAN’T RAISE OR LOWER THE BED
PLATFORM
If there is any binding or difficulty raising or
lowering the bed, it is possible that a foreign
object has become lodged in the spring
mechanism. If there is no obvious culprit,
call Inova customer service for assistance in
troubleshooting the issue.
THE BED PLATFORM WON’’T CLOSE
COMPLETELY
If the Bed Platform is pivoted up and won’t
completely close to its “Up Position”, it is
possible there is an object lodged between
the back of the Cabinet Front and front
of the Bed Platform. If there is no obvious
obstruction, call Inova customer service for
assistance in troubleshooting the issue.
CARE & MAINTENANCE
INFORMATION
Please refer to your Welcome Booklet for
detailed information on Care & Maintenance
NEED TO DISASSEMBLE AND MOVE
THE WALLBED
Reverse assembly steps from manual
TIP:
Bag and label hardware per Step.
This will be very helpful when reassembling
the WallBed.