Inova WallBed, Инструкция по сборке

Страница: 23 / 57

A. Pivot the mechanism arm until all three of
the front holes are exposed. From the outside
face of the Left Cabinet Side insert a H-075
Bolt through one of the front holes and
align the bolt with the mating hole in the
Left Mechanism. Hand turn a H-086 Nut on
the bolt until it begins to thread, but do not
tighten it completely. Insert another H-075
Bolt through one of the two rear holes. Align
and hand turn another H-086 Nut on the bolt
until it begins to thread, but do not tighten
it completely. After all five H-075 Bolts are
inserted through the outside face of the Left
Cabinet Side, and all five H-086 Nuts are hand
threaded on the bolts, proceed to tighten all
the H-086 Nuts tightly with a crescent wrench,
1/2” box wrench, or 1/2” socket.
B. Repeat “A” for the Right Spring Mechanism.
STEP 8:
Attach the Lift Mechanisms to the Bed Cabinet
H-075
H-086
Mechanism Arm
A
Cabinet Side, Left
Mechansim, Left
B
A
H-075
B
H-086
Cabinet Side, Right
Mechanism Arm
Mechanism, Right