A.
Assemble the Flipover Leg by aligning the
square welded nuts on the Leg Components
to the Crossbar, then securing them together
together with H-358 Button Head Bolts. Ensure
the Leg Components are aligned with the bent
tabs pointing towards each other.
B.
Align the Flipover Leg to the Bed Platform,
as shown. Use H-358 Button Head Bolts
(through the H-364 Sleeve Bearings) to attach
the Flipover Leg to the Side Rails with H-067
Washers for spacing. as shown. Tighten the
Bolts into the T-Nut.
C.
At the inside face of each Side Rail, position a
H-067 Washer over the end of the Button Head
Bolt, and then tighten a H-308 Acorn Nut to
the end of the Button Head Bolt.
STEP 23:
Assemble Flipover Leg
Crossbar
Bent Tab
H-358
Leg Component
Side Rail
H-308
H-067
T-Nut
H-067
Foot Rail
H-364
H-358
Содержание WallBed
