Inoksan BKE2000L, Руководство пользователя

Страница: 19 / 22

19
- Machine should be protected under perfect
working condition and ensured that is operates
under the operator’s safe working conditions.
Rules listed below should especially be
observed :
- This machine should only be used in accordance
with the main purposes it was designed for. Any
other usage is dangerous and inconvenient.
- Protect the machine from atmospheric events
(rain, direct sun rays, etc.).
- Do not let children and unauthorized and
untrained personnel operate the machine.
- The machine should only be operated by
authorized and trained personnel.
-
Keep the machine in perfect operation
conditions, do not use different protection
equipment, and be careful about operating
security equipment. Periodical maintenance
should be performed by a trained technician.
- Make sure electricity and water connections are
proper before connecting the machine.
- Make sure that the machine is grounded in
compliance with legal regulations. Compliance of
the machine should be controlled by trained
personnel.
- Make sure that the electricity system is
sufficient for the maximum power drawn by the
machine.
- Cables between the electrical system and the
main switch should comply with the instructions.
Do not dismantle the cables without checking if
they have power or not.
- A H07RN-F type feeding cable should be used
for this machine.
- The machine should be disconnected from the
electricity system by turning the main switch off
before any maintenance work.
- When a malfunction occurs in the machine, turn
the machine off from the main switch and do not
try
to repair the machine under any
circumstances.
- Repair work should only be done by
manufacturing company or authorized technical
service with original spare parts.
- Do not use water to extinguish a fire broke out
in electrical components. Use powder based fire
extinguishers.
- Do not change the protections. Lift them when
the machine is turned off or its power is cut off.
- If the machine will not be used again, cut the
power off and remove the power cable.
- Read the instructions in the user’s guide for
cleaning the machine.
- Do not clog the suction part.
- Do not turn the machine on without a filter.
- Only authorized technicians should open the
control panel.
- Do not put your hands in detergent water. In
case of contact with your eyes, rinse with plenty
of water.
- Do not open the door too fast. Open the door 15
seconds after the motor stopped.
- When the door is open, make sure the support
pillar holds the door.
- If the security switch stops the conveyor system,
remove the material that caused the switch to stop
the system before restarting the machine.
- Make sure the plate sizes comply with the
machine sizes.
- Do not use any dispensary or equipment that are
not used by the manufacturer company.
Otherwise, working order the machine may be
altered and security issues may arise.
- Use non-foam detergents. Use the detergent in
the amounts suggested by the manufacturer
company according to the hardness of water and
tank capacity.
- Do not use acid or corrosive substances for
washing the plates or cleaning the machine.
- Do not use sharp objects like stainless brushes
while cleaning the stainless pillar.
- Not using corrosive and environmentally
harmful substances or exceed the suggested
amounts to protect the environment.
- Personnel handling the plates post-wash should
comply with legal hygiene regulations.