NV10 FAMILY USER MANUAL
Copyright © Innovative Technology Ltd 2016
Doc: GA02116 - NV10 FAMILY USER MANUAL
Version:1.1
Page 73 of 80
3.
Reconnect the cable to the
top half of the NV10 USB/+
validator.
4.
Press and hold the push
button on the side for over 3
seconds, when the button is
released the bezel LED will
flash at a constant rate.
5.
The NV10 USB/+ is now in
trusted mode for 30 seconds.
Once the keys are negotiated
with the host, disconnect the
NV10 USB/+ validator from
the cable and re-connect the
top and bottom sections.
Plug the validator back to the
host and your validator
should
now be installed and
configured.