
NV10 FAMILY USER MANUAL
Copyright © Innovative Technology Ltd 2016
Doc: GA02116 - NV10 FAMILY USER MANUAL
Version:1.1
Page 18 of 80
5.4
Dataset/Firmware Programming
5.4.1
Validator Manager
5.4.1.1
General Description
Validator M
anager is a utility which allows the user to reprogram any of ITL’s
validators, hoppers as well as coin and note recycler. Please note that admin rights
are required during installation. The validator must be in SSP for the Validator
Manager to detect the device.
5.4.1.2
System Requirements
•
Windows 7 or above
•
.Net Framework 4
•
2015 C++ Redistributable
•
256mb ram
•
50mb hard disk free
•
ITL Drivers
•
Connected NV10 USB/+ with active
com port
5.4.1.3
Hardware Setup
Connect the power supply to the DA2/IF17. Connect the USB cable to the DA2/IF17
and to your computer or laptop. Connect the
Place setup drawing here, example below
5.4.1.4
Switching to Programming Mode (SSP)
Before programming via the Validator Manager the NV10 USB/+ needs to be
switched to its programming mode (SSP interface). Please refer to
procedure for doing this.
5.4.1.5
Programming the device
Once you have switched the unit into SSP, open Validator Manager and click detect
devices. This will scan all active com ports for a unit, if your NV10 USB/+ fails to
connect please ensure the correct drivers are installed and the unit is in SSP.
Caution!
We have seen instances where one
of t
he dll’s (itdata1.dll) used in
Validator Manager are flagged as a
Trojan, this is a false positive and if
this happens you will need to add a
rule to your antivirus to allow the
file to run.