NV10 FAMILY USER MANUAL
Copyright © Innovative Technology Ltd 2016
Doc: GA02116 - NV10 FAMILY USER MANUAL
Version:1.1
Page 71 of 80
11.2
Switching to Programming Mode (SSP)
Press and hold the configuration button for approximately 2 seconds while the NV10
USB/+ is powered up (until the bezel LED illuminates). The Bezel LED will flash
rapidly as the button is released to indicate that SSP is being loaded. Once this
process has finished the NV10 USB/+ will reset.
The NV10 USB/+ will now be in Programming Mode (SSP) and allow connection to a
PC via a CN392 cable, DA2 adapter or connection to a DA3.
Pressing and holding the button again will return the NV10 USB/+ to its original
interface.
