Controls and Machine Operation
NOTE:
Directional instructions (left, right, up, down, push, pull, etc.) are given from the operator’s point of
view.
Drive Controls
Figure 1 Operator Controls
The drive controls (two levers) are located to the right and left of the operator.
To move the machine forward, push the left and right levers forward at the same time and hold
them in position.
To move the machine in reverse, pull back the left and right levers at the same time and hold
them in position. The reverse alarm sounds.
To turn the machine to the left, push the right lever only.
To turn the machine to the right, push the left lever only.
AUTO STOP:
When you release the drive levers, the engine continues to run but the machine
stops moving.
Left Handle Thumb Controls
The throttle is control with the left thumb slider.
The upper thumb button operates the headlight.
The lower thumb button operates an optional water mister.
Right Handle Thumb Controls
The front blade is controlled with the right thumb slider.
Ignition
Switch
Left Drive Control
Right Drive Control
Throttle
Thumb Switch
Front Blade
Control
Headlight Control
Water Mister
(optional)
Tachometer
Information
Display