•
DO NOT operate the Terminator 2100PRO near an open flame or smoking materials.
•
DO NOT run the machine onto piles of debris.
•
NEVER operate the Terminator 2100PRO in any manner that may cause the machines to become
unstable and tip over.
•
NEVER engage in horseplay on or near the Terminator 2100PRO.
•
ALWAYS use the seat belt on the Terminator 2100PRO. The seatbelt will help provide you the
proper footing and balance.
•
ALWAYS turn the off engine and turn the fuel flow control to OFF when the machine is not in use.
•
NEVER stand directly behind or in front of the Terminator 2100PRO when the engine is running.
•
NEVER put your hands or feet in the blade area when the engine is running.
•
DO NOT exceed recommended speed.
•
NEVER refuel, lift the hood, inspect the blade or otherwise service, or maintain the Terminator
2100PRO while the engine is running.
•
DO NOT move the Terminator 2100PRO if the engine lid is open.
•
NEVER sit or stand next to, under, or near the Terminator 2100PRO during transportation in a
moving vehicle, whether by itself or with other equipment.
•
NEVER attempt to use the Terminator 2100PRO on a non-horizontal surface.
•
NEVER attempt to turn around, or otherwise maneuver, the Terminator 2100PRO on a ramp or hill.
Ventilation Requirements
•
Use machine only in well-ventilated areas.
The internal combustion engine of the Terminator 2100PRO produces carbon monoxide gas. Carbon
monoxide (CO) is a colorless, odorless, highly poisonous gas that is harmful and in sufficient
concentrations may cause illness or death.
•
When operating this machine indoors provide adequate ventilation to prevent the accumulation of
Carbon Monoxide.
•
When in doubt about ventilation stop operation until you are sure the ventilation is adequate. A
Carbon Monoxide (CO) monitor is highly recommended to monitor the air whenever the Terminator
2100PRO is operated indoors.
•
Read and understand the following OSHA Fact Sheet regarding Carbon Monoxide poisoning.
