Innova IGZC09NI/O-1, Руководство пользователя, Страница: 12 / 182

ENG
10
How to use the remote control to operate the unit
6
SWING:
Press this button to set up &down swing angle, which circularly changes as below:
/
8
OFF
This remote controller is universal . If any command
/ 8
or
/ 8
is sent out, the unit will
carry out the command as
/
8
/ 8
indicates the guide louver swings as:
/
8
7
I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
When I FEEL function is turned on, the remote controller should be put within the area where
indoor unit can receive the signal sent by the remote controller.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
/
1
15
5
2
6
3
12
16
4
11
8
9
13
7
10
14
WiFi
1
2
3
4
3
4
2
1
Press this button to achieve the on and off of healthy and scavenging functions in operation
status. Press this button for the first time to start scavenging function;
LCD displays“
/ 8
”. Press the button for the second time to start healthy and scavenging func-
tions simultaneously; LCD displays“
/
8
” and “
/ 8
” . Press this button for the third time to quit
healthy and scavenging functions simultaneously. Press the button for the fourth time to start
healthy function; LCD display “
/
8
” . Press this button again to repeat the operation above.
NOTE: This function is applicable to partial of models.
9
SLEEP:
• Press this button, can select Sleep 1 (
/ 8
), Sleep 2 (
/ 8
),Sleep 3 (
/ 8
) and cancel the
Sleep, circulate between these, after electrified, Sleep Cancel is defaulted.
• Sleep 1 is Sleep mode 1, in Cool mode: sleep status after run for one hour, the main unit
setting temperature will increase 1°C,setting temperature increased 2°C, the unit will
run at this setting temperature; In Heat mode: sleep status after run for one hour, the
setting temperature will decrease 1°C, 2 hours, setting temperature will decrease 2°C,
then the unit will run at this setting temperature.
• Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a
group of sleep temperature curve.
• Sleep 3- the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press ”Turbo” button for a long time, remote control enters into
user individuation sleep setting status, at this time, the time of remote control will display ”1
hour ”, the setting temperature ”88” will display the corresponding temperature of last setting
sleep curve and blink (The first entering will display according to the initial curve setting value
of original factory);
(2) Adjust ”+” and ”-” button, could change the corresponding setting temperature, after adju-
sted, press ”Trubo ”button for confirmation;
(3) At this time, 1 hour will be automatically increased at the timer postion on the remote con
trol, (that are ”2 hours ” or ”3 hours ” or ”8 hours ”), the place of setting temperature ”88” will