INNO-P11 User’s Guide
INNOSTREAM Confidential
PAGE : 58 of 99
On: You can answer the incoming call by the slider opening.
Off: You can answer the incoming call by only [SEND] regardless of the slider opening.
<Auto Redial>
With this menu, your phone makes up to five attempts to redial a phone number after an
unsuccessful call.
The following options are available.
On: The number entered is redialled automatically.
Off: The number entered is not redialled.
! Note: The number of retrial may be variable according to the cause of the unsuccessful call.
If you press any key or close the folder cover, or if an incoming call or SMS is arrived,
the redialling mode is stopped.
/***********************************************************************************/
이란,아랍, 아시아 버전만 적용.
<Auto Response>
With this menu, Select Auto Response to set the phone to answer an incoming call
automatically after ring time.
<Set Auto Response>
On: Enable set the phone to answer an incoming call automatically.
Off: Disable set the phone to answer an incoming call automatically.
<Ring Time>
Enables you to decide which ring time of the auto response.
<Greeting Speech>
This function allows you to record voice memo and set it as the greeting speech.
After recording, you can play recorded voice memo and save to “ *.mem” file.
You can launch Option menu by pressing [NAVI-CENTRE].
After the recoded voice memo is set to a file, you can set as greeting speech by
selecting Set Auto Response option.
<Auto Response File>
With this menu, you can play, organize, delete.
Display the list of files recorded in Auto Response, Record Speech menu
/***********************************************************************************/
9.3.7 Data Connections
In order to use WAP browser, MMS and E-mail, you should set up the Data Connections to
connect to the Internet. You can edit or rename each Data Connections in list. To use different
profile for MMS connection and E-mail connection, activate the data connection in MMS Settings
menu and E-mail Setting menu. Your phone is preset with the default WAP data connections.
Edit : This option edits the data connection setting values.
Add New : This option adds new data connection setting values.
Delete : This option deletes a data connection setting values.
