INNO-P11 User’s Guide
INNOSTREAM Confidential
PAGE : 41 of 99
- Message Center
With this menu, you can view the Message Center Number List and currently activated the
Message Center Number.
Activate : Activate the selected Message Center Number to use sending a message.
Add : Add the Message Center Number, if the Message Center SIM memory is available.
Edit
:
Edit the Message Center Number and Save it.
Delete : Delete the Message Center Number. If the selected Message Center Number is the
Base Area, this menu cannot be displayed.
The number can be obtained from your home network service provider.
- Validity Period
This menu allows you to set the length of time period that your message will be stored at the
Message Service Center in the network whilst attempts are made to deliver them to the
recipient. Available options are One Hour, Two Hours, Six Hours, One Day, Two Days, One
Week, Four Weeks and Six Months.
- Delivery Report
You can set whether network sends the delivery report message to your phone or not. The
delivery report message means that the sent message has arrived to the recipient properly.
- Reply Path
With this menu, you can select which Message Service Center will route your reply message.
If you select Own Center, the cost of the reply message is charged to your bill and you can
receive the reply message regardless of the recipient’ s SMS service subscription.
Own Center : When the recipient sends reply message to you, your own Message Service
Center that has set on the Message Center menu is used.
Remote Center : When the recipient sends reply message to you, his Message Service
Center(Remote Message Service Center) is used.
- Message Protocol
With this menu, you can use a network messaging service which offers you the facility of
converting your text messages into alternative formats (Text, Fax, Voicemail, ERMES, Paging,
X.400 or Internet).
! Note : All formats may not be available on all networks.
- Connection Type
You can select which connection will be used for sending or receiving SMS
CS Only : Only Circuit Switch Connection will be used.
CS Preferred : If Circuit Switch connection and GPRS connection are possible, Circuit Switch
connection will be used at first. If failed, GPRS connection will be used.
GPRS Only : Only GPRS Connection will be used.
GPRS Preferred : If Circuit Switch connection and GPRS connection are possible, GPRS
connection will be used at first. If failed, Circuit Switch connection will be used.
