Innominate mGuard, Справочное руководство

Страница: 213 / 260

mGuard centerport
I15007_en_02 Innominate Security Technologies
213
– Firmware/firmware.img.x86_64.p7s
In the case of the file install.x86_64.p7s, ensure that the file version that Innominate has de-
clared for use for the rescue procedure via CD is used.
If required, these files can be made available in the Rescue Config folder on the CD:
Rescue Config/licence.lic License file that should be installed in the device during the
rescue procedure.
Rescue Config/<serial>.lic As above, only the wildcard <serial> is replaced by the serial
number of the device. The same CD can be used for various
devices simultaneously.
Rescue Config/preconfig.atv Configuration profile, which should be applied in the firm-
ware during the rescue procedure. The file must be applied
by script Rescue Config/preconfig.sh.
Rescue Config/<serial>.atv Same as <serial>.lic
Rescue Config/preconfig.sh Script file, which is run directly after installation of the new
firmware. You can find details in the document “Innominate
mGuard - Application Note: Rollout Support” under
www.innominate.com .