8520-R1 4-Port Wireless N Gateway
56
4.5.1.5 WAN
– Channel Config – 1483 Routed Mode
1483 Routed:
When
1483 Routed
mode is selected, the following screen will pop-up. Fixed (Or Static)
is used whenever a known Fixed (Or Static) IP is assigned. The accompanying information such as the
Subnet mask
,
Local IP Address
and the
Remote IP Addres
s should also be specified. Up to three Domain
Name Server (
DNS
) addresses can also be specified (Click
Services
– DNS – DNS Server
configuration
page and fill in the DNS server IP address provided by your ISP). These servers would enable you to have
access to other web servers. Valid IP addresses range is from 0.0.0.0 to 255.255.255.255.
Channel:
VPI:
Virtual Path Identifier is a virtual path used for cell routing that is identified by an 8-bit
field in the ATM cell header. The VPI field specifies this 8-bit identifier for routing.
VCI:
A Virtual Channel Identifier is a virtual channel that is identified by a unique numerical
tag that is defined by a 16-bit field in the ATM cell header. The purpose of the virtual
channel is to identify where the cell should travel. The VCI field specifies this 16-bit
numerical tag that determines the destination.
Encapsulation:
There are 2 Encapsulation type:
LLC
VC-Mux
Channel Mode:
Select
“1483 Routed”
from the drop down manual.
Enable NAPT:
Select
“Disable”
or
“Enable”
the NAPT functionality. Default setting is
“Enable”
.