Innoband 8520-R1 Скачать руководство пользователя страница 114

Страница: 114 / 131

8520-R1 4-Port Wireless N Gateway

114

LAN (Link/Act) LED does not light up.

Ans.

Check the following:

1. Make sure that the LAN cables are securely connected to the 10/100Base-T port.

2. Make sure that you are using the correct cable type for your Ethernet equipment.

3. Make sure the computer's Ethernet port is configured for auto-negotiation.

Failed to configure the 4-port Wireless N Gateway through web browser (By a client PC in

LAN)

Ans.

Check the following:

1. Check the hardware connection of the 4-port Wireless N Gateway

’s LAN port. The LED will lit

when a proper connection is made.

2. Check your Windows TCP/IP setting (Refer to Chapter 3 for setting details).

3. Open the Windows System Command Prompt:



For Windows 9x/ME: Manually enter

winipcfg

, then press

Enter



For Windows 2000/XP/Vista/Win7: Manually enter

ipconfig/all

, then press

Enter

4. You should have the following information listed on your Window System:



IP Address: 192.168.1.x



Submask: 255.255.255.0



Default Gateway IP: 192.168.1.1

forgot or lost my Administrator Password.

Ans.

Reset

the 4-port Wireless N Gateway

to factory default by pressing the

“Reset”

button for more than 5 seconds. Default Username:

admin

, default Password:

admin

I need to upgrade the Firmware.

Ans.

In order to upgrade the Firmware with the latest features, check your local dealer or ISP for

technical support. Before proceed the upgrading process, check the following details:

1. Download the latest Firmware and save at your pointed location.

2. Read the firmware release note carefully before proceed the upgrading process.

3. Refer to

Admin

– Upgrade Firmware

section for the upgrading process.

Содержание 8520-R1




































































































































Результаты поиска

Содержание 8520-R1

Отзывы:

Innoband 8520-R1, Руководство пользователя, Страница: 114 / 131

Результаты поиска

Содержание 8520-R1

Отзывы: