Innoband 8520-R1 Скачать руководство пользователя страница 87

Страница: 87 / 131

8520-R1 4-Port Wireless N Gateway

4.7.5 Advance

– Port Mapping

The DSL device provides multiple interface groups. Up to five interface groups are supported including

one default group. The LAN and WAN interfaces could be included. Traffic coming from one interface of a

group can only be flowed to the interfaces in the same interface group. Thus, the DSL device can isolate

traffic from group to group for some application. By default, all the interfaces (LAN and WAN) belong to the

default group, and the other four groups are all empty. It is possible to assign any interface to any group but

only one group.

Fields in this page:

Field

Description

Enabled/Disabled

Radio buttons to enable/disable the interface group feature. If disabled, all interfaces

belong to the default group.

“Interface groups

To manipulate a mapping group:

1. Select a group from the table.

2. Select interfaces from the available/grouped interface list and add it

to the grouped/available interface list using the arrow buttons to

manipulate the required mapping of the ports.

Click “Apply Changes” button to save the changes.

Function buttons in this page:

Apply Changes

Save configuration to system. New configuration will take effect after saving into flash memory and

rebooting the system. See section “Admin” for details.

Содержание 8520-R1




































































































































Результаты поиска

Содержание 8520-R1

Отзывы:

Innoband 8520-R1, Руководство пользователя, Страница: 87 / 131

Результаты поиска

Содержание 8520-R1

Отзывы: