9
Integriti
Integriti
Integriti
Integriti
Integriti
LCD Terminal Keypads User Manual.
The <OK> key must always be pressed after you have entered
your secret PIN code (Unless performing a “Quick Arm or
Disarm” operation). You have 10 seconds to press the <OK>
key after you have completed entering the code.
The <LEFT> arrow key will move the cursor to the left
OR when prompted with the Area ON/OFF display, and
depending on the User’s permissions, changes the display to
control the “24Hour” (Tamper) part of the selected Area
(Normally restricted to Installer or Owner), and/or to the
AREA LIST ON/OFF display.
OR if pressed when not logged on, may display
Airconditioning control options if enabled.
The <RIGHT> arrow key will move the cursor to the right
OR if pressed when not logged on, may display Named Action
control options if enabled.
The <UP> and <DOWN> arrow keys are used to scroll up
and down through a list of available items to view, control or
program. e.g. Areas, Zones, Review messages, etc.
OR If pressed when not logged on, may display summary of
Area Status if enabled.
NOTE: Keypad keys also have other functions when you are selecting, viewing,
controlling or programming items in the menu. Details of the keypad functions when
you are in the menu are provided in the relevant section of this manual.
REMEMBER !! Any time you need it,
is as close as the press of a key.
TERMINAL
If PIN codes are used to unlock doors, pressing the <OK> key again will perform the
Door unlock operation on the Door associated with the Terminal.
On Terminals that are programmed ONLY for Door Access control, the <OK> key
may not need to be pressed twice.
(In some cases, the <OK> key may be programmed to unlock a door without a PIN
code being used. e.g. In low security periods, or when the Terminal is on the inside
of an Exit Door.)
