7
Integriti
Integriti
Integriti
Integriti
Integriti
LCD Terminal Keypads User Manual.
The Indicator Lamps.
The multi purpose lamps can be configured by the Installer to provide quick and
simple indication of Area and Alarm Status, Door functions and/or other conditions.
When programmed for “Area Array”, the lamps will indicate the status of 4 (Elite) or
8 (EliteX) sequential Areas in the following manner:
Off
On
Flashing
Area Off (Disarmed)
Area On (Armed)
Alarm in this Area.
If the lamps are configured to show other conditions, record their purpose here:
Lamp 1 ........................................... Lamp 5 ...........................................
Lamp 2 ........................................... Lamp 6 ...........................................
Lamp 3 ........................................... Lamp 7 ...........................................
Lamp 4 ........................................... Lamp 8 ...........................................
NOTE:
Lamps 5 to 8 are on EliteX only.
CUSTOM MESSAGE.
“LCD Messages” can provide a customized
message for the Site and/or the Terminal.
Some common applications are:
-The Monitoring Station’s Telephone number.
-The Installer’s Telephone number.
-“Welcome to <your company name>”
TERMINAL
System Status Messages.
System operation is continuously monitored for problems and special conditions such
as Power Supply, Battery, Communication or LAN Network problems.
Your Installer can configure your system so that a “Status Message” is displayed on one
or more of the LCD Terminal/s if such a condition exists and will remain on the LCD
display until the condition is rectified. e.g.
If you see a message like this displayed, you should report it to an appropriate person
such as the system Administrator or Installer. The system might also be programmed to
report nominated system problems to a remote monitoring station.