Inner Range Integriti Elite, Руководство пользователя

Страница: 15 / 32

13
Integriti Integriti Integriti Integriti Integriti
LCD Terminal Keypads User Manual.
Area On/Off
 
  

   
 
  


 

- , ,
or
Deferred Arming (Timed Disarm) option.
In some applications the system is programmed so that certain Users may only turn the
Area Off for a limited time. e.g. A cleaner or guard working outside normal working
hours may only turn the Area Off for 60 minute intervals with a Warning period provided
before the Area Re-arms. The Defer Timer and Warning Timer periods are both
programmable by the Instller.
When these Users turn an Area Off, the display
shows the Area is Off with a timer running.
At any stage during the defer time, the User can
turn the Area Off again, to re-start the timer, or
turn the Area back On and cancel the timer.
When the Defer timer expires, the LCD Terminal
will beep every 2 seconds and display this
warning.
The User can still perform the Area Off or Area
On operations during this warning period, but if
no action is taken the Area will automatically turn
On when the warning period expires.
-AREA / AREA LIST SELECTION.
You may select other Areas or Area Lists by using
the <UP> and <DOWN> Arrow keys and/or the
<DIGIT> keys to select the 1st letter that the Area
name begins with.
e.g. A system has Areas named “Reception”, “R &
D” and “Robs Office”.
1) To select any of these Areas, press the <6 PQR>
key until an Area starting with “R” is displayed.
(In this case you would need to press the key 3 times
to select the letter “R”)
2) If the Area that you require is not displayed, use
the <DOWN> Arrow key to scroll through, and
select, another Area starting with that letter.
Note: Areas are sorted numerically after the 1st letter.