Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 6 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 4
1. GENERAL INFORMATIOS
1.1 Introduction
This machine is designed to make straight or angled cuts, especially on wood sheets.
Some information and illustrations in this manual may differ from the machine you own, the
descriptions and illustrations are based on a machine containing all options. Therefore, refer only to
information connected with the purchased machine configuration.
With this manual we would like to promote the information necessary for the maintenance and proper
use of the machine. Our technical support network is available for any technical problems, new parts or any
other requirements that may be necessary for the development of your activity.
This manual must be read and understood by the operator before operating the machine. This will
promote greater knowledge of the product's operation for greater safety and better results.
For readability, this manual has been divided into parts highlighting the most important operations. For
a quick search of the topics, it is recommended to consult the index. To mark the importance of some basic
passages we highlight these through symbols that show their proper procedure.
Safety Warnings:
Safety information that, if not followed, will pose a serious risk to the operator.
Safety information which, if not followed, could pose a serious risk to the life of the
operator.
Safety information which, if not followed, could injure the operator.
1.2 Machine identification
There is a machine nameplate, containing company data, year of manufacture, serial number and
technical specifications.
1.3 Service Recommendations
We request that only trained and authorized persons may service or perform any operation involving
disassembly of the machine. Follow the instructions in this manual for the correct use of your equipment.
Only trained and authorized personnel should use and service the machine after reading the instruction
manual. Respect accident prevention regulations, general safety rules as well as industrial medicine rules.