Inmes FF-325 PLUS, Руководство по эксплуатации

Страница: 7 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 5
2. SAFETY PRECAUTIONS
2.1 Security rules
Read the instruction manual carefully before you start using, storing, moving or doing any other
operation with this machine.
- The manufacturer disclaims any liability for damage to persons or objects which may be caused by any
failure to comply with safety rules.
- The machine operator must be trained by a qualified person to operate this machine.
- It is strictly forbidden to use the machine under the influence of alcohol, drugs or medications.
- All operators must be properly trained in the use, adjustment and operation of the machine.
- Operators should read the manual carefully, paying particular attention to warnings and safety notes. In
addition, they must be informed of the hazards associated with the use of the machine and the precautions
to be taken, and must also be instructed to periodically inspect the guards and safety equipment.
- Before moving, adjusting, repairing or cleaning, disconnect the machine from the mains.
- After a long period of disuse, the machine belts may loosen, this causes an increase in blade downtime
(downtime should be less than 10 seconds) immediately tighten the belts.
- The work area around the machine must always be kept free and clean to allow immediate access to the
control panel.
- Never use blades other than those prescribed for use with the machine. The material to be cut must not
contain metal parts.
- Never cut parts that may be too small or too large while respecting the capabilities of the machine.
- Do not cut pieces of wood that contain visible defects (cracks, knots, metal parts, etc.).
- Never put your hands between the moving parts of the machine.
- Keep your hands away from the saw; Feed the saw with the help of a pusher.
- Keep unauthorized persons away from the machine.
- Never use cracked or challenged broken saw blades.
- Do not use the blade beyond the speed limits imposed by the manufacturer.
- Carefully wipe the surface of the blade and make sure that the blade is horizontally well positioned and
undamaged.
- Always wear gloves to hold the blade.
- Mount the blade in the correct cutting direction of the machine.
- Never start the machine without being properly protected by the safety material.
- Fit the suction ducts to a correct exhaust system; Collectors should always be on while the machine is on.
- Never open the safety door while the machine is operating.
- Some unpleasant experiences have shown that operators wearing objects such as watches, bracelets and
rings are in danger because they can cause serious accidents, so remove any of these objects before
operating the machine.
- Button and fasten the work clothes to the operator's body.
- Remove any hanging or loose clothing as it may get caught in the moving parts of the equipment, causing
accidents.
- Always wear strong shoes in accordance with the appropriate regulations of each country.
- Wear goggles, ear protectors and correct masks.
- Never let unauthorized persons operate, adjust or tidy up the machine.
- The manufacturer is not responsible for any damage caused by arbitrary modifications to the machine.
- Any transportation, assembly or disassembly must be done by trained personnel who have been qualified
for the specified operation.
-The operator should not leave the machine at any time without turning it off.