36
Maintenance operations
Programming manual
10.7
Loop Diagnostics
This menu will allow you to carry out diagnostics on all the devices connected to the loop.
At the end of the diagnostics phase, the control panel will show: the maximum level of contamination, the
device concerned, the average level of contamination level, the value read on all devices and (with regard the
supported protocol) the quality of the signal received by each loop device on the LED.
From panel:
<key>, Maintenance, <code>, LOOP Diagnostic,
or
<key>, 7, <code>, 7
Use keys
S
and
T
to navigate through the
loops.
Press
on the loop you wish configure/
modify.
Use keys
S
and
T
to navigate through the
parameters.
Press
to view the device list:
Use keys
S
and
T
to scroll the devices, or
type in the device number.
Press
to view the device parameters.
Use keys
S
and
T
to navigate through the
parameters.
Use keys
W
and
X
to scroll the devices.
Note:
The parameters depend on the type of device installed, refer to the device instructions for details.
Detectors, IN Modules, OUT
Modules, Sounders, Call points
This is the total number of devices connected to the loop, arranged in
categories.
Average contamination level
The level is calculated on all the detectors of the same type.
Higher contamination level
on detector
This is the maximum percentage of contamination found on the detector
concerned.
Average loop contamination
This is the average percentage of signal deterioration calculated on all
the detectors on the loop.
MAX signal deterioration
on point
This is the maximum percentage of deterioration found on the detector
concerned.
Report Printout
Status Temperature
Press
X
on this option to printout the data relating to loop and the
devices in the configuration (with addresses other than “255”).
J
1 L o o p 1 < L o o p D e s c r i p t i o n >
2 L o o p 2 < L o o p D e s c r i p t i o n >
3 L o o p 3 N o t a v a i l a b l e
4 L o o p 4 N o t a v a i l a b l e
L
J
< L o o p D e s c r i p t i o n >
D e t e c t o r s : x x x
I N M o d u l e s : y y y
O U T M o d u l e s : z z z
L
J
0 0 1 < D e t e c t o r t y p e > < D e s c r i p t i o n >
0 0 2 < D e t e c t o r t y p e > < D e s c r i p t i o n >
0 0 3 < D e t e c t o r t y p e > < D e s c r i p t i o n >
0 0 4 < D e t e c t o r t y p e > < D e s c r i p t i o n >
J
P o i n t 1 / 0 0 1 < P o i n t D e s c r i p t i o n >
T y p e : O p t i c a l d e t e c t o r
S m o k e : - - -
S e n s i t i v i t y : - - -
Содержание SmartLoop Series
Страница 42: ...42 The SmartLeague software programme Programming manual ...
Страница 43: ...Programming manual 43 ...