INIM SmartLoop Series, Руководство по программированию

Страница: 23 / 44

Programming manual
Configuring the system 23
Set the control panel address.
Press to confirm.
Press to confirm.
Note:
To delete a control panel from the network, follow the procedure described above and assign address
“00” to the control panel concerned.
8.1.5 Auto-configure the local I/O and dialer boards
(SmartLoop\INOUT and SmartLoop\PSTN)
From panel: <key>, Programming, <code>, Configuration, Modify Configuration, AUTO Enroll,
Attachment boards,
or:
<key>, 8, <code>, 1, 2, 1, 5
If I/O expansion boards (SmartLoop\INOUT) and the dialer board (SmartLoop\PSTN) are present, the
control panel will detect and recognize them.
To delete the dialer from the configuration, simply disconnect it and initialize the local I/O auto-
configuration phase.
“I/O Expansion” and “SmartLoop/PSTN”
appear only when these boards are detected.
8.1.6 Auto-configuration of the entire system
From panel: <key>, Programming, <code>, Configuration, Modify Configuration, AUTO Enroll, Complete,
or:
<key>, 8, <code>, 1, 2, 1, 1
The complete auto-configuration function configures (in the following order) the loops, the RS485 BUS
devices, the network, the I/O expansion board and the voice dialer. It presents the screens of the manual
procedure (described in the previous paragraphs) and requests confirmation before starting.
Press to confirm and start the Global auto-
configuration phase.
Note:
This procedure may take several minutes. A progress bar will indicate the advancement of the auto-
configuration phase.
S M A R T - L o o p
P a n e l n e t w o r k a d d r e s s = n _
( P a n e l n o t i n n e t w o r k )
Y o u h a v e c h o s e n A u t o - c o n f i g u r a t i o n :
N e t w o r k a d d r e s s n n ,
C O N T I N U E ? E n t e r = Y E S E s c = N O
O p t i o n a l c a r d s f o u n d :
S m a r t L o o p / P S T N
Y o u h a v e c h o s e n A u t o - c o n f i g u r a t i o n :
T h e L o o p s x , x , x , x , R S 4 8 5 B U S
N e t w o r k a d d r e s s x x , B o a r d s
C O N T I N U E ? E n t e r = Y E S E s c = N O