INIM Electronics SmartLevel SPS24060G, Инструкция по установке и программированию

Страница: 17 / 34

Installation and programming manual
Technical description 17
Figure 9 - Switching power supply
The switching power supply is attached to the backplate of the metal enclosure. The power supply type
depends on the station model.
Note:
INIM s.r.l. reserves the right to change, replace, in part or entirely, the components not strictly relating
to the installation procedure described in Chapter 7 - Installation instructions.
5.3 Technical specifications
SPS24060G SPS24160G
[A]
Mains input terminal board
[B]
SmartLevel mother board connector
[C]
Battery connector
[D]
Thermal probe connector
Specification SPS24060G SPS24160G
AC power
230 V (-15% / +10%) 50/60 Hz
Maximum current draw 230V 0.5 A 1.1 A
Nominal output voltage 27.6 V
Maximum output current 2.1 A 5.2 A
I
max. a
1.5 A 4 A
I
max. b
1.5 A 4 A
Maximum battery current emission during primary power
failure 1.5 A 4 A
Maximum current for external loads and accessory devices 1.46 A 3.96 A
Maximum battery-charge current 0.6 A 1.2 A
Minimum current (I
min
) 40 mA
Battery specifications 2 x 12V, 7 Ah 2 x 12V, 17 Ah
2 x 12 V/7 Ah YUASA NP-12 FR or similar with case
flame class UL94-V2 or higher
Maximum internal resistance of the batteries (R
i max
) 2.7 Ohm 1 Ohm
Output voltage
from 18 to 27.6V
Battery shutdown tension
19V
Internal fuse of switching power supply module T 3.15A 250V
Maximum output current ripple 1%
Operating temperature from -5°C to 40°C
Isolation class I
Enclosure protection class (EN 60529) IP30
Dimensions 325 x 325 x 80 mm 497 x 380 x 87 mm
Weight 2.8 Kg 6 Kg
A
A
D
C
B
D
B
C
SPS24060G
power supply
SPS24160G
power supply
N
L
230V ~ 50/60 Hz
AC Input
N L
230V ~ 50/60 Hz
AC Input