INIM Electronics SmartLevel SPS24060G, Инструкция по установке и программированию

Страница: 8 / 34

8 General information
Power supply stations
2.6 Recommendations
INIM Electronics recommends that the entire system be checked completely at regular intervals (refer to
paragraph 2.7 System test ).
2.7 System test
This system has been designed to provide the highest standards of reliability and performance. Malfunction
of any of the system devices may cause the system to be incapable of reaching the intended levels of
performance. Most problems which prevent the system from operating as intended can be found by regular
testing and maintenance of the system devices (refer to
Chapter 12 - Maintenance ).
2.8 Note to the installer
In order to provide adequate protection and instructions for correct use of the apparatus, you (the
installer) must be fully aware of the regulations and operating procedures of firefighting. As the only
individual in contact with system users, it is your responsibility to instruct them on how to use this device
properly.
2.9 Technical support
Our professional engineers are readily available to assist you. If you require help, call us and you will be
put through to a person capable of answering your questions and providing you with the service you need.
2.10 Conventions
2.10.1 Terminology
• Power supply unit: refers to the device defined in paragraph 2.12 CE Mark .
• Left, right, behind, above, below: refer to the directions as seen by the operator in front of the
mounted device.
• Qualified personnel : those persons whose training, expertise and knowledge of the laws and bylaws
regarding service conditions and the prevention of accidents, are able to identify and avoid all possible
situations of danger.
• Press: click on a video button, or press a key on the panel keypad.
2.10.2 Graphic conventions
Following are the graphic conventions used in the text. For a description of the graphic conventions relating
to the interface, refer to
Chapter 6 - User interface .
Note:
The detached notes contain important information about the text.
Attention:
The attention prompts indicate that total or partial disregard of the procedure could damage
the connected devices.
Danger:
The danger warnings indicate that total or partial disregard of the procedure could injure the
operator or persons in the vicinity.
Conventions Example Description
Text in Italics Refer to paragraph 2.10.2
Graphic conventions
Text in italics: indicates the title of a chapter, section, paragraph,
table or figure in this manual or other published reference.
[uppercase
letter] [A] Representation of a part of the system or video object.
BUTTON Ok/Esc computer or control panel keys.