10
The network
Fire detection and extinguishant system
3.2
Click-on the
Settings
button (
[F]
).
In the window that opens, select the communication channel to be used for access to the control panel of
the cluster the PC is connected to (SERIAL), or to the control panel connected to the Ethernet network
intended for use as the access point to the entire cluster (IP).
-
IP
- if selected, you must enter the IP address and the port of the control panel. There is also a button that launches
a test on the set channel and parameters.
-
SERIAL
- if selected, you must select the serial port used.
3.3
Navigate to the visualization of the system at network layer using the appropriate button (
[B]
).
3.4
Click-on the
Read
button (
[D]
) to read the system configuration. Once the Read procedure ends, the
entire control-panel network will be shown.
The control panel the PC connected to for the read operation, and to which the "gateway" functions are
assigned, will be identified by the symbol here at the side. The control panel with this function is the one that
allows the interconnection with any other clusters via IP.
3.5
At this point it is possible to select each control panel, edit the parameters and rewrite the edited configuration
on the system by means of the
Write
button (
[E]
).
3.5
Sharing the events on the network
It is possible to define which events from other control panels are to be displayed for each node of the network
by duly configuring the
Events filter
section.
This section can be reached by selecting a control panel from the network shown on the display, and from this
by clicking-on the FPMCPU module image.
The Praesidia allows you to program up to 5 events filters through the programming section of the FPMCPU
frontplate module, by accessing the
Events Filter
section by means of the appropriate button.
Each event is defined by 4 categories of factors by which it is characterized:
• cluster group
• control panel in the network
• zone of origin
• label (type)
In order to setup a filter, after selecting it, you must first indicate its composing events, by enabling the factors that
characterize it, that is the type and origin.
[A]
Filters selection
programming field
[B]
Button to change the
priority of the events
[C]
Category of event
factors
[D]
Buttons to enable all
the factors of the
corresponding
category
35$(6,',$
6\VWHP!3DQHO!&38!(YHQWVILOWHU
(YHQWV)LOWHU
)LOWHU
(YHQWVSULRULW\
(YHQWVUHFHLYHGIURP
6HOHFWDOO
2Q
6HOHFWDOO
2Q
6HOHFWDOO
2Q
6HOHFWDOO
2Q
1
&OXVWHU
1
3DQHO
1
=RQHV
1
/DEHO
&OXVWHU
3DQHO
=RQH
(9$&8$7,21
&OXVWHU
3DQHO
=RQH
(9$&8$7,215(67
&OXVWHU
3DQHO
=RQH
$/$50
&OXVWHU
3DQHO
=RQH
$/$505(6725(
&OXVWHU
3DQHO
=RQH
35($/$50
&OXVWHU
3DQHO
=RQH
35($/$505(672
&OXVWHU
3DQHO
=RQD
($5/<:$51,1*
&OXVWHU
3DQHO
=RQH
($5/<:$51,1*5
&OXVWHU
3DQHO
=RQH
683(59,6,21
&OXVWHU
3DQHO
=RQH
683(59,6,215(67
&OXVWHU
3DQHO
=RQH
/22323(1
&OXVWHU
3DQHO
=RQH
/22323(15(672
C
A
B
D
C
C
C
D
D
D
